Concrete is strong in compression but weak in tension, so some cracking is natural. However, many cracks in driveways, patios, garage floors and slabs can be avoided with the right mix, good preparation and correct curing. Here are the most common causes and how to prevent them.
1. Plastic Shrinkage Cracking
Cause: in the first few hours after pouring, water evaporates from the surface faster than it can be replaced from below. The surface shrinks and fine cracks appear, often in hot, sunny or windy weather.
Prevention: pour in cooler parts of the day, use windbreaks or shade, cover the surface with curing sheets as soon as finishing allows, and consider polypropylene fibre reinforced concrete.
2. Drying Shrinkage
Cause: as concrete dries over weeks and months, it slowly shrinks. If the slab is restrained, it cracks.
Prevention: cut or form control joints at regular intervals so cracks form in straight lines where you want them, and avoid adding extra water to the mix.
3. Too Much Water in the Mix
Cause: adding water on site makes concrete easier to place but reduces strength and increases shrinkage.
Prevention: order the correct slump class for the job instead of adding water. If you need more workability, ask your supplier about a suitable mix or admixture.
4. Poor Sub-Base or Ground Movement
Cause: soft spots, poorly compacted hardcore, tree roots or clay soils that shrink and swell can cause the slab to settle unevenly. London clay is particularly prone to seasonal movement.
Prevention: remove soft material, lay and compact a suitable sub-base in layers, and follow an engineer’s advice for foundations near trees or on clay.
5. Wrong Grade or Thickness
Cause: a slab that is too thin, or a grade too weak for its use, will crack under load, especially driveways used by heavy vehicles.
Prevention: choose the right concrete grade and thickness, and add mesh or fibres where needed.
6. Poor Curing
Cause: concrete needs moisture to gain strength. If it dries too quickly, the surface becomes weak and prone to cracking and dusting.
Prevention: keep the slab damp or covered for several days, protect it from frost, and avoid heavy loads until it has gained enough strength. See our guide on how long concrete takes to set and cure.
7. Cold or Wet Weather
Cause: freezing before the concrete has gained strength can cause permanent damage, and heavy rain on a fresh surface weakens it.
Prevention: check the forecast, use insulated covers in cold weather and follow our tips for pouring concrete in cold or wet weather.
Are All Cracks a Problem?
Fine hairline cracks are usually cosmetic. Wide cracks, cracks that keep growing, or cracks where one side is higher than the other may indicate a structural or ground problem and should be checked by a professional.
Get the Right Concrete From the Start
Most cracking problems begin with the wrong mix, too much water or rushed preparation. METRO Readymix supplies the correct grade and slump for your project, with ready mix, volumetric and pumping services across London. Call 020 8129 0605 or request a free quote.
Need Concrete Delivered in London?
Ready mix, volumetric concrete and pump hire. Tell us your postcode, volume and date for a fast, free quote.